Optional Accessories

The tool setting gage for double tool cross slide is an essential aid for fast, accurate setting of tool bits to the spindle centerline of your CYCLEMATIC CTL-27EVS,CTS-27EVS machine. With the CYCLEMATIC tool setting gage slow scale measurement for setting tools on center is eliminated.

Tool No: T-301

For: CTS-27EVS, CTL-27EVS, CP-27CNC

The tool setting gage is an essential aid for fast, accurate setting of your CYCLEMATIC CHR-68EVS and CTL-618EVS Lathes.

The ground surface "A" is for setting tools cutting on front of work piece. Surface "B" is used for setting tools cutting on rear of work piece. The gage is adjustable for work piece. The gage is adjustable for its respective machine.

Tool No: T-302

For: CT-1118CNC, VT-606CNC, CHR-68EVS, CHR-68e

Tool No: T-303

For: CTL-618EVS, CTL-618e

The carriage length indicator permits full carriage travel, thus allowing for "close to spindle machining". The carriage length indicator is a needed accessory when producting parts to exact shoulder lengths or when facing to close tolerances.

The fully jeweled dial indicator reads directly in. 0.02mm increments with a range of 25.4mm. The long rod allows the indicator to be extended to a distance of 165mm.

The carriage length indicator can be mounted to your CTL-618EVS Lathe without machining.

Tool No: T-CLD-618 *indicator is not included.

For: CTL-618EVS, CTL-618e, CHR-68EVS, CHR-68e

The micrometer carriage stop is a useful accessory when producing parts with exact shoulder lengths or when facing to close tolerances.

The indicator reads in .0.015mm increments. The micrometer reads in 0.02mm. Each CTL-618EVS Lathe is machined for direct application of the indicator stop.
*indicator is not included.

*micrometer and indicator are not included.

Tool No: T-CSD-618

For: CTL-618EVS, CTL-618e, CHR-68EVS, CHR-68e

Long cylindrical work held between centers requires a steady rest to prevent such work from springing away from a cutting tool. A steady rest is also used when there are machining operations to be performed on the end of work which prohibits the use of the tailstock center. The steady rest has a maxi-mum capacity of 76mm

Tool No: T-SR-300

For: CTL-618EVS, CT-1118CNC, CTL-618e

When you have work that is small in diameter in relation to length, it may spring away form the cutting tool. In such cases, the follow rest applied to the carriage, as shown, will assure you of accurate work.

Tool No: T-FR-300

For: CTL-618EVS, CT-1118CNC, CTL-618e

The turret tool holder diameter 16mm slide travel 9mm.

Tool No: L-40T

For: CTL-618EVS, CTS-27EVS, CTL-27EVS, CTL-618e

The turning or boring of precision tapers is readily accomplished on the CYCLEMATIC CTL-618EVS lathe by the use of a taper turning attachment. The taper turning attachment is based on the sine bar principle-swiveling the guide bar from one end. Graduations for setting guide bar are in degrees.

The taper turning attachment mounts directly on the back of the lathe bed and is adjustable along the bed to suit the work.

Tool No: TL-T-01

For: CTL-618EVS, CTL-618e

The radius turning attachment is used for precision turning of concave or convex surfaces up to 38mm radius. Useful for turning punches, dies, ball shaped valve seats, and special spherical cutting tools.

The swivel slide is mounted on precision preloaded ball bearings for accuracy and rigidity. The swivel slide moves through 360º.

Hardened feed screws are mounted on preloaded ball bearings and have adjustable dials graduated in thousandths of an inch.

Tool No: T-RT-108 For: CTL-618EVS, CTL-618e

T-RT-208 For: CTS-27EVS, CTL-27EVS, CP-27EVS

The Rear Tool Holder Slide Assembly for CTL-618EVS Machines, as shown with a L-3023 tool post in place, can be quickly mounted to the carriage cross slide. The top slide travel is 19mm and is controlled by an easy reading feed screw dial graduated in 0.02mm. A double locking arrangement maintains the position of the slide and tool holder. The rear tool holder slid assembly consists of the RTS-10-1 base with mounting screws and RTS-10-2 tool holder slide. Optional tool holders for rear slide assembly are the L-3023 wedge type tool post, T-RMH-06 Multiple tool holder.

Tool No: T-RTS-10

For: CTL-618EVS, CTL-618e

This assembly can stop carriage.

Tool No: T-BLD-68

For: CTL-618EVS, CTL-618e CHR-68EVS, CHR-68e

The square turret is applied directly to the tool post T-slot of the compound slide. Tje turret takes standard 10mm square tool bits. By a simple movement of the ball-handled lever, the turret is automatically unlocked, indexed to the next tool position and relocked, ready for the next machining operation.

Tool No: T-AIT-06

For: CT-1118CNC, CTL-618EVS, CTL-618e, CTL-27EVS, CP-27EVS

The bed adapter is used for mounting the standard double tool cross slide normally used on Second Operation Machines. This permits the use of all double tool cross slide accessory tooling such as standard tool holders, multiple tool holders, the straight and taper turning slide and any combination of this tooling applicable to the job being run.

Tool No: CHR-68-08

For: CHR-68EVS, CHR-68e

The cross slide base provides the needed rigidity when forming, cutting off, or turning with the straight and taper turning slide attachment. The cross slide is easily operated by a hand lever. Two threaded feed stops are provided for fine adjustment of each tool position.

Tool No: CHR-68-12

For: CHR-68EVS, CHR-68e, CTS-27EVS, CTL-27EVS, CP-27EVS

This attachment can be used on the front or rear of the double tool cross slide. It is for straight or angular turning, back facing, under-cutting or for turning long slender parts that cannot be readily formed by a full width tool Two of the attachments may be mounted on the double tool cross slide for turning or boring tow different angles at on setting of the work, such as valve setas or bevel gears. The swivel base is graduated in degrees and can be swiveled and locked to any angle. The lever operated rack and pinion slide travel of 44mm is controlled in either direction by adjustable stops. The tool post takes standard 8mm square tool buts.

Tool No: CTS-27-07

For: CHR-68EVS, CHR-68e, CTS-27EVS, CTL-27EVS, CP-27EVS

The vertical cut-off slide for the CHR-68EVS, CTL-618EVS, CTS-27EVS and CTL-27EVS Lathes permits a Separate station for cut-off operations. It can be applied to the spindle nose without machining and is mounted with bolts provided.

Tool No: LB-68-11

For: CT-1118CNC, CT-606CNC, CTL-618EVS, CHR-68EVS, CTL-618e, CHR-68e

Tool No: CTS-27-08

For: CP-27CNC, CTS-27EVS, CP-27EVS, CTL-27EVS

The compound slide rest can be readily applied to the CYCLEMATIC Second Operation Machine for screw feed precision turning, facing and boring operations. The large diameter feed screws are hardened and mounted on preloaded ball bearings. The feed screw dials are 50.8mm in diameter. Both dials give direct readings in thousandths and are adjustable for Zero settings.

Tool No: CTS-27-10

For: CTS-27EVS, CTL-27EVS, CP-27EVS

The tailstock is applied directly to the bed ways in place of the turret. It is ordered for center work.

Tool No: CTS-27-11

For: CTS-27EVS, CTL-27EVS

The slide is for deep hole drilling, lapping or any other operation requiring a tool travel up to 140mm.

Tool No: CTS-27-09

For: CTS-27EVS, CTL-27EVS

This transparent plastic chip and coolant shield is Optional Equipment on the CYCLEMATIC CTL-618EVS, CTL-27EVS, and CHR-68EVS Lathes.

The hinged section is adjustable to left or right to suit work requirements.

Extended sections offer additional splash prevention.

Tool No: T-CS-10

For: CT-1118CNC, CT-606CNC, CTL-618EVS, CHR-68EVS, CTS-27EVS, CTL-618e, CHR-68e, CTL-27EVS

This male center has an 27mm head diameter and is furnished with all CYCLEMATIC tailstocks. All centers are hardened and ground.

Tool No: T-MC-2

For: CTL-618EVS, CTL-27EVS, CT-1118CNC

This male center has an 32mm head diameter and is furnished with all CYCLEMATIC tailstocks. All centers are hardened and ground.

Tool No: T-LC-2

For: CTL-618EVS, CTL-27EVS, CT-1118CNC, CTL-618e

This drill chuck has 3 different kind of size. Which is 1.2-13mm, 3.0-19mm size.

Tool No: TDC13-MT2, TDC-16-MT2, TDC19-MT2

For: CT-1118CNC, CTL-618EVS, CTL-618e, CTL-27EVS

The electronic magnifier lamp has 5 diopter glass. The arm unit can be move anyway.

Tool No: HQ32122-5

For: CT-1118CNC, CT-606CNC, CP-27CNC, CTL-618EVS, CHR-68EVS, CTS-27EVS, CP-27EVS, CTL-618e, CHR-68e, CTL-27EVS